800W spindle 4axis mini diy cnc lathe engraving drilling machine 3040 USB port wood router
[32907549895] 800W spindle 4axis CNC 3040 ER11 collet USB port Router Engraving Drilling and Milling Machine Introduction The CNC router is suitble for Industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. The cnc router is designed for large area engraving work such as Industrial or Hobby Prototype Building, Building Model Making, PCB, Advertising Signs, Artwork, Crafts, Aircraft Models, RC Model parts, etc. So, you can do engraving work at office or home. Model and Technical Parameters MODEL 4030Z Attribute 800W-4axis Axis 4axis Interface USB port Limit switch yes Tool auto-checking Yes Spindle Motor: 800W Weigh 48 Machine Dimensions: 650X530X520mm Rack material: 6061 and 6063 Hard aluminum alloy Engraving area: 395X285mm Z-Axis Stroke: 70mm, Engraving depth depends on the length of the tool edge Acceptable material thickness ≤ 120mm Rail type: Chromeplate shaft + Linear Bearings, Surface hardening 61HRC Type of screw: Ball screw 16mm, Pitch 5mm Spindle motor: HF water cooling spindle , 800W , 0-24000r/min Collet type: ER11,1/8"(3.175mm or 6mm) Collet Stepper motor and drive: two-phase hybrid stepping motor 57BYGH56-2.5A, 8 segments drive. Maximum operating speed: 4000mm/min (Engraving speed: 300-3000mm/min) Repeat positioning Accuracy: 0.03mm Software Compatability: Mach3/Emc2/Kcam, (Type3,Wentai, ArtCAM, coppercam) Command code: G code/.nc/.ncc/.tab/.txt Rotation Axis (4th Axis) Description: Center height: H = 60mm Maximum turning diameter: ≤ 110mm Deceleration ratio: 4:1 Stepper motor: NEMA23BHH76-3A Weight: 5KG
US $1805.00Grab Now 11% US $1606.45
Tidak ada komentar:
Posting Komentar